Custom Cabinets, made according to approved dimensions
Kitchen cabinets, wardrobes, walk-in closets, TV cabinets and vanities — CNC-cut, machine edge-banded and trial-assembled in our own factory before they ship to your door.
- measurement-checked tolerance
- project-specified board / project-specific board documentation board
- 10-year warranty
precision
cycles
Every Component, Specified and Tested
Hover the points on the cabinet to see the engineering behind the surface — the same build standard runs through every product we make.
Built from the inside out
We don’t just hang doors on a box. Each cabinet is a system of certified boards, branded hardware and sealed edges — engineered for daily use over decades.
- 1
Carcass board
18mm project-specified board / project-specific board documentation-P2 core, edge-sealed against moisture.
- 2
Soft-close hinge
brand-specified hardware / brand-specified hardware clip-on hinges, 50,000+ cycles.
- 3
Drawer runner
Full-extension tandem runners with smooth glide.
- 4
Edge banding
Hot-melt / laser PUR banding for a seamless seal.
- 5
Back panel
Grooved-in back for rigidity and a square frame.
- 6
Adjustable foot
Levelling feet for a flush fit on any floor.
- 1Carcass board
18mm project-specified board / project-specific board documentation-P2 core, edge-sealed against moisture.
- 2Soft-close hinge
brand-specified hardware / brand-specified hardware clip-on hinges, 50,000+ cycles.
- 3Drawer runner
Full-extension tandem runners with smooth glide.
- 4Edge banding
Hot-melt / laser PUR banding for a seamless seal.
- 5Back panel
Grooved-in back for rigidity and a square frame.
- 6Adjustable foot
Levelling feet for a flush fit on any floor.
Premium Hardware, Built In as Standard
We fit only branded mechanisms with documented cycle ratings — so drawers glide and doors close softly for the life of the cabinet.
TANDEMBOX runners & CLIP top hinges
Sensys hinges & Quadro guides
Reliable hinges for budget builds
Pull-outs, lifts & storage systems
Handle-free Tipmatic opening
Choose the Right Build for Your Climate
Mix carcass boards and finishes to balance durability, eco-grade and budget. Every option below is available across our cabinet range.
| Board / Finish | Moisture Resistance | Eco-Grade | Best Use | Finish Options |
|---|---|---|---|---|
| Particleboard project-specified board | Moderate | project-specified board / project-specific board documentation-P2 | Wardrobes, dry-area cabinets | Melamine, veneer, PET |
| Plywood | High | project-specified board / project-specific board documentation-P2 | Kitchen & bathroom carcasses | Veneer, lacquer, laminate |
| MDF | Moderate | project-specified board / project-specific board documentation-P2 | Shaker & routed doors | Lacquer, PET, acrylic |
| Solid Wood | High | documented sourcing-sourced | Premium doors & frames | Stain, oil, lacquer |
| Lacquer / PET / Acrylic | High | finish documentation | High-gloss & matte fronts | RAL colors, matte–gloss |
Eight Cabinet Families, Built to Spec
Typical dimensions shown for reference — every cabinet is made to your exact opening, layout and finish.
Kitchen Cabinets
- Base height 720mm
- Depth 560–600mm
- Wall height 720–900mm
Wardrobes
- Depth 550–600mm
- Height 2400mm+
- Door hinged / sliding
Walk-in Closets
- Module width 900–1200mm
- Shelf pitch 32mm
- Layout U / L / parallel
TV Cabinets
- Height 400–500mm
- Depth 400–450mm
- Mount floor / floating
Bathroom Vanities
- Height 820–850mm
- Depth 460–550mm
- Core moisture-resistant
Bookcases
- Shelf depth 280–350mm
- Span ≤900mm
- Build built-in / freestanding
Shoe Cabinets
- Depth 300–350mm
- Height 900–2400mm
- Fittings tilt-out / flip
Sideboards
- Height 750–850mm
- Depth 400–450mm
- Top wood / stone
Measured in Millimeters, Not Guesswork
From CNC nesting to a full trial assembly, every cabinet is checked against the drawing before it leaves the line.
Send Us Your Project. We’ll scope review before quotation.
Tell us about your space and needs — a design consultant will prepare a project review and 3D design proposal, with Clear next steps.
Thank you!
Your request has been received. A consultant will contact you after reviewing your project information with your project review.